Chat Now

CBT offers training to meet the industrial production needs of your workforce. Whether your team needs training for industrial workforce products or automation equipment, ask CBT how we can streamline support for your production. We provide targeted training programs to dial-up improvements in your industry.

CBT provides various training options to provide your employees with job-ready skills and continued learning. Whether your industrial training solutions are in their infancy or your workforce needs a tune-up on best practices, CBT offers the latest in manufacturing equipment training to include job-ready skills, RS Logix 5000, motion controls, safety, maintenance, arc flash, drives, visualizations, thin manager, and much more.

Keep the skills of your workforce current and start finding your industrial training solutions by accessing our menu of services.

ControlLogix/Studio 5000

CCN144: Studio 5000 Logix Designer Level 4: Kinetix 6500 (CIP) Programming

After completing this course, you should be able to configure, test, tune, and program CIP motion axes in the Studio 5000 Logix Designer® programming environment.

View Agenda
Course Dates By Location
CBT Sidney
  • 5/14/2024 - 5/17/2024
Contact Us To Schedule

CCP143: Studio 5000 Logix Designer Level 3: Project Development

Upon completion of this course, given a functional specification for a Logix5000™ application, you should be able to develop a project to meet the specification requirements.

View Agenda
Course Dates By Location
CBT Sidney
  • 6/11/24 - 6/14/24
Contact Us To Schedule

CCP146: Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals

After completing this course, you should be able to perform basic ControlLogix® and Studio 5000 Logix Designer® tasks, such as:

  • Creating and configuring a project
  • Communicating with a controller
View Agenda
Course Dates By Location
CBT Cincinnati
  • 3/5/2024 - 3/6/2024
  • 5/14/2024 - 5/15/2024
CBT Sidney
  • 7/9/2024 - 7/10/2024
CBT Springboro
  • 8/13/2024 - 8/14/2024
Contact Us To Schedule

CCP151: Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming

After completing this course, you should be able to program basic ladder logic instructions for Logix5000™ controllers. This is a skill-building course that provides you with the resources and hands-on practice required to complete this objective.

View Agenda
Course Dates By Location
CBT Cincinnati
  • 3/7/2024 - 3/8/2024
  • 5/16/2024 - 5/17/2024
CBT Sidney
  • 7/11/2024 - 7/12/2024
CBT Springboro
  • 8/15/2024 - 8/16/2024
Contact Us To Schedule

CCP153: Studio 5000 Logix Designer Level 2: ControlLogix Maintenance and Troubleshooting

Upon completion of this course, you will be able to troubleshoot a previously operational ControlLogix® system and restore normal operation.

View Agenda
Course Dates By Location
CBT Cincinnati
  • 3/26/24 - 3/29/24
Contact Us To Schedule

CCP182: Essentials of Industrial Ethernet Networks for an OT Professional

In this course, you will learn how to verify communications between devices, recognize data transmission types, and differentiate between OSI Model Layer 2 and Layer 3 switching functions.

View Agenda
Course Dates By Location
CBT Cincinnati
  • 6/10/24 - 6/11/24
CBT Sidney
  • 2/6/24 - 2/7/24
Contact Us To Schedule

CCP183: EtherNet/IP Configuration and Troubleshooting

This course should prepare you to effectively:

  • Configure a Stratix® switch (5700, 8000, and/or 8300) to meet a variety of network requirements
  • Assign IP addresses to devices on an EtherNet/IP network using rotary switches and a variety of software
  • Monitor switch performance and status
  • Diagnose and resolve issues with switches and devices on a network
View Agenda
Course Dates By Location
CBT Cincinnati
  • 6/12/24 - 6/14/24
Contact Us To Schedule

CCP299: Studio 5000 Logix Designer Level 1: ControlLogix Fundamentals and Troubleshooting

Upon completion of this course, you should be able to troubleshoot a previously operational ControlLogix® system and restore normal operation.

View Agenda
Course Dates By Location
CBT Cincinnati
  • 2/19/2024 - 2/23/2024
CBT Sidney
  • 3/4/2024 - 3/8/2024
  • 07/22/24 - 07/26/24
CBT Springboro
  • 6/24/2024 - 6/28/2024
Contact Us To Schedule

Drives

CCA101: AC/DC Motors and Drives Fundamentals

This course is a skill-building course that provides you with a basic understanding of AC and DC motor and drive concepts and terminology. At the completion of this course, you will have the necessary fundamental knowledge and skills required to attend other Rockwell Automation AC and DC drives courses.

View Agenda
Course Dates By Location
CBT Sidney
  • 5/29/24 - 5/30/24
CBT Springboro
  • 7/23/24 - 7/24/24
Contact Us To Schedule

Industrial Maintenance

EMS100: Basic Electrical Concepts

This course provides information on the basic concepts of direct current (DC) electricity and magnetism, including electrostatics, basic circuit concepts, and measurement of electrical quantities and associated numerical concepts, Ohm’s Law, practical circuits, electromagnetism, and electrical measurements. There are hands-on exercises for device operation and simple circuit construction and analysis.

View Agenda
Course Dates By Location
No Upcoming Dates

EMS230: Motor Control and Troubleshooting

This course provides information on the concepts associated with systematic troubleshooting of instrumentation systems. Participants use practical application of troubleshooting techniques in exercise scenarios.

View Agenda
Course Dates By Location
CBT Sidney
  • 4/01/24-4/05/24
  • 4/22/24 - 4/26/24
  • 5/20/24 - 5/24/24
  • 7/15/24 - 7/19/24
  • 8/12/24 - 8/16/24
  • 8/26/24 - 8/30/24
Contact Us To Schedule

MMS105: Valve Fundamentals

This course provides information on the types of valves and actuator used as control elements, valve components, and valve applications. There are hands-on exercises for equipment setup and evaluation.

View Agenda
Course Dates By Location
No Upcoming Dates Contact Us To Schedule

MMS125: Hydraulics and Pneumatics Fundamentals

This course provides information on the concepts associated with hydraulics, hydraulic systems and components, fluid principles, hydraulic system design, and hydraulic schematic symbology.

View Agenda
Course Dates By Location
CBT Springboro
  • 2/13/24 - 2/15/24
  • 3/26/24 - 3/28/24
  • 5/21/24 - 5/23/24
Contact Us To Schedule

MFG213: Industrial Electrical Controls Fundamentals

This course is designed to provide knowledge and skills required to install, maintain and troubleshoot machine controls.

View Agenda
Course Dates By Location
CBT Cincinnati
  • 7/16/24 - 7/19/24
CBT Sidney
  • 9/17/24 - 9/20/24
CBT Springboro
  • 3/5/24 - 3/8/24
  • 4/9/24 - 4/12/24
Contact Us To Schedule

Motion Controls

CCN132: Motion Control Fundamentals using Kinetix 5700 (CIP) Servo Drives

This course is designed to provide you with an understanding of the concepts, terminology, functionality and applications of motion control. This course will also allow you to establish the foundation you need before learning the skills necessary to maintain and program motion control systems.

View Agenda
Course Dates By Location
No Upcoming Dates Contact Us To Schedule

Safety

Arc Flash

This course will provide electrical workers with the knowledge and skill needed to recognize the shock and arc flash hazards that they encounter in their daily work activities.

View Agenda
Course Dates By Location
CBT Cincinnati
  • 11/5/24
CBT Sidney
  • 4/30/24
Contact Us To Schedule

SAFCOM101: Safety Relays and Devices Maintenance and Troubleshooting

This course will introduce you to monitoring safety relays and input and output devices used to configure safety systems according to industry standards for functional safety of machinery.

View Agenda
Course Dates By Location
CBT Cincinnati
  • 4/16/24 - 4/17/24
CBT Sidney
  • 8/6/24 - 8/7/24
Contact Us To Schedule

Visualization

CCV204A: FactoryTalk View ME and PanelView Plus Programming

After completing this course, given a computer with FactoryTalk® View Machine Edition (ME) software and a PanelView™ Plus 7 terminal, you should be able to produce an operational application running on the terminal.

View Agenda
Course Dates By Location
CBT Sidney
  • 8/20/24 - 8/23/24
Contact Us To Schedule

CCV207: FactoryTalk View SE Programming

This course provides opportunities for you to work with local FactoryTalk View SE applications.

View Agenda
Course Dates By Location
CBT Cincinnati
  • 8/19/24 - 8/23/24
CBT Sidney
  • 5/6/24 - 5/10/24
Contact Us To Schedule